Energycel Unit Assembly and Installation

Detailed below are the general instructions for assembling and installing your EnergyCel unit. I am confident that when you do your gas mileage comparison from before you will be amazed.

Unit Assembly:

The EnergyCel Unit comes partially assembled in three identical pieces, and stacked for easy shipment. Some simple additional assembly is required. Figure 1 shows the unit as it is shipped.

1. Remove backing from foam padding strips and apply to the face of each magnet. (Figure 2)

2. Due to the powerful magnetic field, assembly is best accomplished by turning each piece perpendicular to the other while inserting the first screw and locknut. (Figure 3)

3. After insertion of the first screw, rotate the magnet side to align holes for insertion of second screw. (Figure 4)

4. Repeat steps 1 and 2 to attach the third magnet strip to the unit. Leave one seam open to allow mounting over the fuel line. Tighten the screws securely. (Figure 5)

Unit Installation:

1. Locate the Fuel Line (if you have trouble locating the fuel line, have a mechanic mark it for you)

2. Slip the EnergyCel over the fuel intakeline, close and insert final screws and self-locking nuts through the holes provided. Tighten all nuts securely.

3. Remove the backing from the rubber pad and adhere to the side of the EnergyCel Unit nearest the vehicle frame.

4. Insert cable ties through long slots in the EnergyCel Unit and tighten until the Unit is firmly attached to the vehicle.

Installation Tips:

1. For optimum effectiveness and better gas mileage, install the EnergyCel between the fuel pump and the engine. Location may vary according to vehicle make and model.

2. NOTE: Magnets can damage some electronic components. Be sure to keep the unit at a safe distance from these during and after installation.

3. Please verify your mileage manually, as results are known to vary with on-board computer mileage calculators.

4. Your car may require a brief “breaking in” period before measurable gains in fuel economy or engine performance will occur. Gains may be affected by type and age of vehicle, driving conditions, and vehicle operators driving habits.

5. Because the unit does not change the mechanical configuration of the vehicle, the warranty is not affected in any way.
Click here to order
Placeholder Image

[Energycel] [How It Works] [Product Benefits] [Testimonials] [How To Install] [Become a Rep]